215TL SERIES SCREW CONVEYOR DRIVE
215TL05
215TL10
215TL15
215TL20
215TL25
215TL30
215TL35
215TL40
ACTUAL RATIOS
5.867
10.229
14.383
20.289
25.52
31.059
35.982
38.971
DRIVE SHAFT DIA
FOR CONVEYOR DIAMETER
215TL SCREW CONVEYOR DRIVE WITH REMOVABLE DRIVE SHAFT
DIMENSIONS (INCHES)
DRIVE SHAFT KIT
WEIGHT (LBS.)
TROUGH END ADAPTOR KIT
A
B
DORRIS
CEMA
2
9, 12
K21508-2
34
KD624-2
KC924-2
2 1/8
21/32
2 7/16
12, 14
K21508-2 7/16
39
KD624-2 7/16
KC924-2 7/16
2 3/4
3
12 thru 20
K21508-3
45
KD624-3
KC924-3
2 7/8
25/32
3 7/16
18 thru 24
K21508-3 7/16
56
KD624-3 7/16
KC924-3 7/16
3 7/8
29/32
SCREW CONVEYOR DRIVE
TROUGH END ADAPTORS
All dimensions are typical. All trough end adaptors can use either the standard or high performance packing gland assembly. C69 adaptor uses 1-1/2 inch drive shaft; C924 adaptor uses 2 through 3-716 inch drive shaft.
MOTOR MOUNTS (2MM - 90 LBS.)
Motor brackets are shown in the intermediate position. The brackets can be raised or lowered 6 1/4 inches to the high or low position by moving to the next set of mounting holes.
The motor brackets can be mounted on either the long (6 o'clock) or short (3 o'clock) sides of the housing. Consult factoryfor trough end clearances for the other motor mounting positions not shown.
V-BELT CENTER DISTANCES FOR INTERMEDIATE MOUNTING POSITION (INCHES)
MOTOR MOUNT ORIENTATION
MOTOR FRAME SIZE
143T/145T
182T/184T
213T/215T
254T/256T
284T/286T
324T/326T
MIN.
MAX.
SINGLE REDUCTION
6:00
27.22
30.22
28.22
31.22
28.97
31.96
29.97
32.96
30.72
33.71
31.71
34.71
3:00
22.14
25.1
23.13
26.09
23.87
26.83
24.85
27.82
25.6
28.57
26.58
29.56
DOUBLE REDUCTION
27.38
30.36
28.37
31.35
29.11
32.1
30.11
33.09
30.85
33.84
31.85
34.83
17.38
20.31
18.35
21.3
19.09
22.03
20.07
23.02
20.81
23.76
21.79
24.75
DORRIS TROUGH END CLEARANCES *
'U' FLANGE (TEF) & FLUSH END (FE) TROUGH ENDS
FLARED (FL) TROUGH ENDS
TUBULAR (TU) TROUGH ENDS
9 - 16 - 24
6 - 14 - 24
9 - 14 - 24
