Smart Gears

Shopping Cart: 0 Items - $0.00

Home »

415TR Series Shaft Mounted Gear Drive

*10, 15, 25, 30, 35, & 40:1 Ratios are double reduction units and use the

2 3/4 inch high speed shaft in alternate location shown. (Double Reduction dimensions in parentheses.)
DOUBLE & TRIPLE REDUCTION SHAFT MOUNTED GEAR DRIVE

MODEL	415TR010	415TR015	415TR020	415TR025	415TR030	415TR040	415TR060	415TR080
ACTUAL RATIOS	10.651	14.373	20.782	24.523	30.226	40.656	59.233	79.085
SHIPPING WEIGHT (LBS.)	1050	1100	1050	1100	1050	1100	1100	1100
MODEL	415TR100	415TR125	415TR150	415TR175	415TR200	415TR225	415TR250
ACTUAL RATIOS	101.063	124.569	148.157	176.568	196.271	220.973	245.631
SHIPPING WEIGHT (LBS.)	1100	1100	1100	1100	1100	1100	1100

QUICK RELEASE TAPERED BUSHINGS:

The bushing kit contains a bushing, nut, key(s) and mounting screws.
The recommended driven shaft length is 14.88 inches and uses the recommended keyway length.
When an application requires the minimum driven shaft length, the keyway must be keyed along the entire length.
Consult factory for bore sizes not shown.

BUSHING KIT NO. *	WEIGHT (LBS.)	TYPE	DRIVEN SHAFT DIMENSIONS (INCHES)
BUSHING KIT NO. *	WEIGHT (LBS.)	TYPE	DIA.	KEYWAY WIDTH X DEPTH	RECOMMENDED KEYWAY LENGTH	MINIMUM DRIVEN SHAFT LENGTH
415T415	38	1	4 15/16	1 1/4 x 5/8	13 3/8	12
415T407	53	2	4 7/16	1 x 1/2	14	14
415T403	59	2	4 3/16	1 x 1/2	14	14
415T315	65	2	3 15/16	1 x 1/2	14	14
415T307	74	2	3 7/16	7/8 x 7/16	14	14

NOTES, OPTIONS & ACCESSORIES

MOTOR MOUNTS (4MM - 120 LBS.)

V-BELT CENTER DISTANCES FOR MOUNTING POSITIONS SHOWN (INCHES)

MOTOR MOUNT POSITION	182T/184T		213T/215T		254T/256T		284T/286T		324T/326T		364T/365T
MOTOR MOUNT POSITION	MIN.	MAX.	MIN.	MAX.	MIN.	MAX.	MIN.	MAX.	MIN.	MAX.	MIN.	MAX.
'A'	16.00	20.45	16.74	21.20	17.73	22.19	18.47	22.93	19.46	23.93	20.45	24.92
'B'	26.73	31.21	27.48	31.96	28.48	32.96	29.22	33.71	30.22	34.70	31.21	35.70
'C'	24.54	27.65	25.03	28.21	25.70	28.96	26.22	29.53	26.93	30.31	27.65	31.10
'D'	32.57	36.34	33.19	36.99	34.02	37.85	34.65	38.50	35.49	39.38	36.34	40.26
'E'	19.29	23.64	20.01	24.37	20.97	25.35	21.70	26.08	22.67	27.06	23.64	28.04
'F'	40.35	44.82	41.10	45.56	42.09	46.56	42.83	47.30	43.82	48.29	44.82	49.29

SCOOP MOTOR MOUNT OPTION
Scoop Motor Mounts are available only for models 415, 507, 608 & 700, and permissible only in the 6 o'clock orientation. See Scoop Mount page for diagram, notes and dimensions.

FACE MOUNTING
Face mounting holes are not drilled on standard units -- Contact factory if face mounting is desired.

TORQUE ARM

The preferred position for the torque arm is 90° to a line between the point of attachment of the torque arm to the drive and the low speed shaft. The torque arm must be in tension. Keep the torque plate in the position shown.

EXTERNAL BACKSTOP KIT

Backstop extensions are standard on double reduction drives and can be supplied on single reduction drives if specified when order is placed. See Backstop Kit section for backstop torque capacity.
Kit no. BS415TR- 60:1 thru 250:1 ratios
Kit no. BS415TR-1 - 40:1 ratio
Kit no. BS415TR-2 - 15:1 and 25:1 ratios