MODEL
107TR05
107TR10
107TR15
107TR20
107TR25
107TR30
107TR35
107TR40
ACTUAL RATIOS
5.923
10.051
15.163
20.435
25.086
30.239
34.493
39.882
SHIPPING WEIGHT (LBS.)
65
QUICK RELEASE TAPERED BUSHINGS:
Bushing Kit No.*
Weight (Lbs.)
Type
Driven Shaft Dimensions (Inches)
Dia.
Keyway Width X Depth
Recommended Keyway Length
Minimum Driven Shaft Length
107T107
3
1
1 7/16
3/8 x 3/16
5 1/8
4 3/8
107T106
2
1 3/8
5/16 x 5/32
5 1/4
107T105
1 5/16
107T104
4
1 1/4
1/4 x 1/8
4 1/2
107T103
1 3/16
107T102
1 1/8
107T101
1 1/16
107T100
NOTES, OPTIONS & ACCESSORIES
MOTOR MOUNTS (1MM - 45 LBS.)
Motor brackets are shown in the intermediate position. The brackets can be raised or lowered 4 5/8 inches to the high or low position by moving to the next set of mounting holes.
The motor brackets can be mounted on either the long (6 o'clock) or short (3 o'clock) sides of the housing as shown.
V-BELT CENTER DISTANCES FOR INTERMEDIATE MOUNTING POSITION (INCHES)
MOTOR MOUNT ORIENTATION
MOTOR FRAME SIZE
56/143T/145T
182T/184T
213T
MIN.
MAX.
SINGLE REDUCTION
6:00
22.87
25.87
23.87
26.87
24.62
27.62
3:00
19.29
22.28
20.29
23.27
21.03
24.02
DOUBLE REDUCTION
22.95
25.94
23.94
26.93
24.69
27.68
16.29
19.26
17.28
20.26
18.02
21
FACE MOUNTING Face mounting holes are not drilled on standard units -- Contact factory if face mounting is desired.
TORQUE ARM
The preferred position for the torque arm is 90° to a line between the point of attachment of the torque arm to the drive and the low speed shaft. The torque arm must be in tension. Keep the torque plate in the position shown.
EXTERNAL BACKSTOP KIT
Backstop extensions are standard on double reduction drives and can be supplied on single reduction drives if specified when order is placed. See Backstop Kit section for backstop torque capacity. Kit no. BS107TR - 10:1 thru 40:1 ratios Kit no. BS107TR-5 - 5:1 ratio
